1.AnyCheck Configuration

2.AnyCheck Characteristics

1)EASY & FAST

It is safe by tapping directly into the Healing Abutment,Measurement is faster (within 3 seconds) and easier compared to the RFA Type.

simple move and measure
Immediate measurement for Healing Abutment

2)EFFICIENT

It can be measured for natural teeth or implant prosthesis by tapping directly on the measuring body.As a result, it is more utilized than the RFA type not only in determining the loading time but also in early diagnosis
of inflammation around the implant.

Natural tooth measurable
Implant Crown measurable

3)SAFE

Compared to existing hitting products, the number of hits has been drastically reduced (16 times → 6 times), and if the fluctuation level is less than 59, it is safe by automatically stopping after hitting twice.

* Other company's products are likely to cause errors due to difficulty in adjusting the angle and distance when measuring.

3.AnyCheck Instructions

1)Measurement method

Turn on AnyCheck by pressing the switch button until it turns on.

Slightly contact the tip of the tapping rod to the upper part of the healing abutment. Be cautious not to push the healing abutment.

Maintain the contact angle between 0 to 30 degrees.

Gently press the START button while holding the device stable

Check the measured value displayed on the LCD screen.

Range of the measured value is between 30-85. The smaller the measured value, the weaker the degree of osseointegration.

2)Check the measured value

Measured values 1 to 99 are displayed. (1 to 59 red, 60 to 64 orange, 65 to 99 green)

The lower the measurement value, the greater the implant fluctuation

Measured values (IST scale) differ depending on the height of the healing abutment.

As the standard height of the healing abutment is 4mm, calculate the correct IST value according to the following chart:

Standard +3
7mm height Healing Abutment
Displayed IST value +6
Standard +2
6mm height Healing Abutment
Displayed IST value +4
Standard +1
5mm height Healing Abutment
Displayed IST value +2
Standard
4mm height Healing Abutment
Displayed IST value
Standard -1
3mm height Healing Abutment
Displayed IST value -2
Standard -2
2mm height Healing Abutment
Displayed IST value -4
Standard -3
1mm height Healing Abutment
Displayed IST value -6

4.AnyCheck Specification

Length(mm) / Product name
Category
AnyCheck
Dimensions
207 x 34.5 x 32mm
Weight
100 g
Connectivity
USB cable C-Type
Accuracy
Value ± 3
Hitting speed
Value ± 3
Hitting strength
2.2N
Hitting number
Values 2 to 4 times from 1 to 59 and 6 times from 60 to 99
Hitting angle
0 ° ~90°
Hitting safeguards
Sound warning after 3 strikes
Battery
420mA
Infection prevention
Use disposable cover (material: LDPE)